Data Centre


Fabric maths: Pure + Cisco = end-to-end NVMe

FlashStack in pole position

By Chris Mellor


Analysis Pure and Cisco could build an end-to-end NVMe FlashStack using Pure's NVMe-using FlashArray//x and Cisco's NVMe over fabric's Fibre Channel.

There are three ingredients contributing to this window of opportunity:

  1. Pure's FlashArray//x, which uses NVMe-accessed DirectFlash modules and an NVMe-tuned //X70 controller
  2. Cisco's MDS 9700 Director with 32Gbps 48-port switching module
  3. Cisco UCS C-Series servers with 32Gbps HBAs

The Cisco gear supports NVMe over Fibre Channel and the Pure array supports NVMe drives. Put the two together and we have an end-to-end NVMe over fabrics system offering sub-millisecond latency to servers accessing a shared storage array.

FlashStack is the combined Cisco and Pure converged infrastructure (CI) template offering, similar in intent to the popular FlexPod CI system, built from Cisco servers and networking and NetApp storage. It is an obvious possibility that an end-to-end NVMe FlashStack reference design could be built using the three tech ingredients above.

Among the IT incumbents only Dell EMC has tried doing this with its DSSD array, which was closed down a couple of weeks ago.

Several startups are in the NVMe-over-fabrics-accessed storage array space, such as E8, Excelero, Mangstor, Pavilion Data Systems and also Apeiron with a similar access speed array using hardened Ethernet. All of these systems need RDMA over Ethernet and thus represent a new approach for existing Fibre Channel SAN users looking to upgrade to NVMe over fabrics.

A combined Cisco and Pure approach, adding NVMe to Fibre Channel, looks less of a departure from current practice.

All the main existing storage array vendors are adding NVMe drives and, eventually, NVMe over fabric access to their arrays. But while they are retrofitting NVMe drives to their arrays Pure has already done it and NVMe over Fibre Channel is suddenly sitting there, waiting to be used.

The FlashArray//x will enter GA in the third quarter. Come on, Pure and Cisco, craft an end-to-end NVMe over fabric FlashStack using it, and out-innovate every other CI supplier, including Dell EMC. Wouldn't that be a pure joy to behold? ®

Sign up to our NewsletterGet IT in your inbox daily


More from The Register

Highway to the auto-zone: Cisco is catching up to Brocade in Fibre Channel speed race

Releases two 32Gbit/s switches to boost AFA networking

Cisco goes 32 gigging with Fibre Channel and NVMe

Netzilla adds NVMe over Fibre Channel support on top of 32Gbit/s FC

Hoth stuff: Broadcom readies refined fleet of Fibre Channel kit

More IO, less space, faster NVMe and better automation

The Fibre Channel NVMe cookbook: QED from a storage whizz's POV

Interview Let's nerd out with Greg Scherer again

NetApp goes all in on Fibre Channel-based NVMe-over-Fabrics

On-premises boost paired with public cloud blanket extension

HPE primes storage networking pipes for NVMe-oF data deluge

FC director module and switch cranked up to 32Gbit/s

Hang on, don't go out yet – wait till IBM's done swinging its storage announcements around

Preps mainframes, mid-range arrays, tape and cloud... and that's just to offload all this data

FTC approves Broadcom Brocade buy – if Cisco switch tech is walled off

Both go to Broadcom for their ASIC chips

We pick a storage CTO's brains on Linux-heads, big vendors – and should all the admins NVMe?

Interview Plus: Why NVMe over Ethernet can be a, er, ROCE'y road ...

HPE Storage crows: All the array-slingers NVMe for my SCM

And adds containers to halfway hybrid house Cloud Volumes