Original URL: https://www.theregister.com/2008/07/23/wd_velociraptor_10k_sata/
Western Digital shrinks VelociRaptors for enterprise duty
2.5-inch SATA spinning at 10k RPMs
Posted in Channel, 23rd July 2008 18:55 GMT
Western Digital is making a play for the enterprise storage market today by stripping the bulky heat sink attached to its 10,000RPM VelociRaptor drives and liberating the small form-factor disk that's been locked inside all along.
The number two hard drive supplier technically has offered a 2.5-inch VelociRaptor HDD since April, but claimed that so great was its speed the drive required a 3.5-inch mount to incorporate a built-in heat sink.
Enter the VelociRaptor WD3000BLFS SATA drive apparently cooly content sans mount, and suited for sweltering work inside blade servers and 1U/2U rack trays.
Its specs are similar to WD's current Raptor drives made for high-end consumers.
The new enterprise HDD is offered with up to 300GB raw storage capacity with a SATA 3 Gb/s interface and 16MB cache. But it does consume 35 per cent less power than previous generation Raptor drives, according to WD. Mean time to failure is benchmarked at a healthy 1.4 million hours.
One new feature is Rotary Active Feed Forward (RAFF), which is described as optimizing performance when the drives are used in vibration-prone, multi-drive chassis.
The VelociRaptor is presently the only small form-factor SATA 10K drive out there. Other vendors such as Seagate offer 10,000RPM and 15,000RPM 2.5-inch drives, but only of the SAS persuasion. ®
Another Paleontological Bootnote
Because these things are important: we have updated our raptor size comparison chart for the announcement.
