This article is more than 1 year old

FSP Booster X3 GPU-friendly power supply

Some extra juice for your graphics cards

Review Upgrading your PC? Want to fit two graphics cards, but you don't have a powerful enough power supply? Well, PSU-maker FSP may have just what you need. The Booster X3 is a supplementary PSU that slots into a 5.25in drive bay and is used exclusively to power your PCI Express graphics cards...

The X3 is about the size of a standard optical drive and has a black front bezel with a clear plastic cover. The cover lights up in blue once you power on your PC. Behind the bezel are two 40mm fans that cool the innards of the PSU. This means there's a certain amount of noise and this will be facing you if you sit your system on a desk. That said, if you've got a CrossFire X1900 pairing in your PC, it's likely that the graphics cards will be noisier than the X3 and drench any noise from it when you're playing games.

FSP_Booster_X3

At the rear of the X3 you'll find three connectors: a two-pin power connector (the kind of thing you connect to notebook power bricks), a four-pin Molex connector and a 12-pin proprietary PCI Express graphics card power connector. The two pin-power connector connects to your mains supply, which might sound difficult given that the X3's mounted inside your PC. Don't despair - FSP has supplied a very neat pass-through cable that fits in an empty slot in the back of your PC. This connects to the X3 inside the PC and to a standard two-pin power cable in the back.

You also have to attach a four-pin Molex connector from your PSU to the X3, as this is used to power it on at the same time as you switch on your computer. Finally, the 12-pin connector is for a custom-made cable that has two six-pin PCI Express graphics card connectors at the other end, one for each card. It really couldn't be much easier to hook up the X3 and it doesn't take a lot of effort to get it going.

The PSU inside the X3 has active PFC, and FSP claims that it has up to 85 per cent efficiency. It will output a constant 300W but the peak output is higher. It has two dedicated 12V rails, according to the specs, which means each graphics card should be able to draw a stable 150W from the X3. This is the real advantage over your normal PSU, although this isn’t really an issue if you’ve already got a good-quality PSU these days. However, with evermore power hungry graphics cards, this might be the way high-end gaming PCs will have to go: a dedicated PSU for the graphics cards.

There was no problems powering a pair of X1900 cards in a CrossFire setup, one of the more power hungry card configurations around. However, there should be more than enough juice in the Booster X3 to power even a pair of Nvidia GeForce 7950 GX2s without a problem, considering that it is only powering the graphics cards and nothing else inside your PC.

The downside of the Booster X3 is the retail price. At £61 it's far from cheap, especially when you consider that you can get an 600W PSU from the same maker for a smidge over £86, and it has more than enough power to cater for your whole PC - unless, of course, you're using a pair for GeForce 7950 GX2 cards.

Verdict

The FSP Booster X3 is a clever add-on if you've got an older PSU or you're using a pair of really high-end graphics cards and want to make sure there are no power issues. It's quite expensive for what it is, but it's easy to install and does exactly what it's supposed to do. ®

80%
FSP_booster_x3_tn

FSP Booster X3 GPU-friendly power supply

A secondary power supply for your high-end graphics cards...
Price: £61 inc. VAT RRP

More about

TIP US OFF

Send us news


Other stories you might like