Slash your way inside Apple's Mac Mini
Putty knife adventure
Photos You can break into Apple's new Mac mini, but it's nerve-wracking. However, if you do, you can up its storage capacity to one terabyte .
Popping open a Mac mini for the first time is not for the faint of heart. Unlike the iMac teardown, which requires only a full complement of Torx drivers  and a pair of dent-puller suction cups , disassembling a Mac mini requires a putty knife, serious leverage, and nerves of steel. After you've done it once or twice, however, it's easy.
Before we pry apart Apple's dwarfish desktop, let's take a look at its three main incarnations since the Mac Mini's original release  in January 2005.
The original PowerPC G4 Mini (bottom), the Intel Core Duo (middle), the new Core 2 Duo (top)
The original Mac Mini was a PowerPC G4 machine, which went through a few upgrades before it was discontinued in February 2006. The PowerPC G5 never made it into a Mac Mini, running too hot for its tiny confines.
The first Intel Core Duo/Solo Mac Mini showed up in February 2006, ditching the modem and doubling the number of USB ports. It went through one processor upgrade, then received an Intel Core 2 Duo in August 2007.
Earlier this week, it received a more-powerful build-to-order Core 2 Duo and an additional USB port, swapped its DVI port for a Mini-DVI port and a Mini DisplayPort, upped its Firewire port from FW400 to FW800, and moved to an Nvidia GeForce 9400M integrated-graphics subsystem.
From left to right: the old, the middle-aged, and the newborn
The original Mac Mini had a toy surprise inside - one that was never used: an extra Firewire connection underneath its top. Rumor had it  that it was originally was intended to support a built-in iPod dock. As you know, that dock never materialized.
You didn't really need that warranty, right?
Opening the new Mac Mini, as was true with its previous incarnations, takes mildly inflated cojones. To do so requires that you insert a putty knife between the case and the bottom housing and pry up the innards, bit by bit, moving around the case.
We strongly suggest that you read iFixit's full instructions  before attempting this and any further disassembly - and if you break something, don't come crying to us.
Two antennae on the right for MIMO 802.11n, one on the left for Bluetooth
Once you remove the case, you'll see three antennae. You'll need to remove them before you can go any further in your disassembly efforts.
Black screws in a black case are hard to spot
Four well-hidden Phillips screws fasten the Mac mini's internal frame to the bottom housing. If you want to go further - if, for example, you're in there to install RAM, swap your hard drive, or perform an optical-drivectomy  and add another hard drive - you'll need to remove them, then separate the bottom housing from the frame.
RAM is easily installed in the bottom housing (hairy forearms not essential)
The bottom housing contains the Mac mini's logic board and SO-Dimm slots. Swapping Ram is as easy as, well, swapping Ram - there are two SO-Dimm slots that support up to 4GB of 1066MHz DDR 3 SDRam Swapping the CPU is different matter - it appears to be soldered in place.
The other half contains the hard drive and optical drive, both of which as simple to remove and replace - simple, that is, if you follow the instructions .
Now it's time to put it all back together again
The iFixit folks call this disassembly "a lot simpler than the iMac." The first time we did it, however, the putty-knife step was nerve-wracking - we greatly prefer good old-fashioned screws over plastic pressure-clips. Your mileage - and cojones - may vary.
Still and all, Apple engineers managed a slick bit of manufacturing design to fit all of the Mac Mini's components into its 2 x 6.5 x 6.5in (5 x 16.5 x 16.5cm) body. ®
Photos produced with permission from iFixit.