But I just HAD to be the first person to choose the black helicopter :)

Bahhhh, ba-ba-ba-bahhhh, BA-BA-BA-BAHHHH, BA-BA-BA-BAHHHH, BAHHHH BA-BAHHHH BAHHHH bahh ba-bahh ba-bahhhh!

VAV

...the pink phallus-shaped one please......

Cocks away!!!

Mines the one with the Sicocksky branding on it....

The AH-56 Cheyenne used a pusher prop. Add that to the familiar coaxial designs from the Russian manafacturers and you have what you have. The engineering may be revolutionary, but the concepts are evolutionary.

Wasn't there a design where two lots of rotors intermeshed?

I won't have it

... at something to know it's wrong.

Even if it was whisper quiet and could do 400 Knotts whilst sipping gently at a non-organic fuel, people still wouldn't use it simply because it just doesn't look right.

What would be so wrong with a good old fashioned jet turbine, mounted just below the rotor disc, with harrier-style nozzles to aid VTOL ?

Mine is the one with the oil stains.

To be really cool, you could use a turbojet, maybe?

Mine's the "airwolf" flying jacket.

So a Rotodyne is too noisy for a couple of minutes until the transition to forward flight generates enough lift, but Wokkas* are fine being noisy all the time?

* Chinook, in case you didn't know.

Yep, but apart from the AH-56 (which wasn't contra-rotating), Sikorsky built a very similar helicopter more than 30 years ago - the S-69 (XH-59) ABC. Check it out on WP: http://en.wikipedia.org/wiki/S-69

There is a rotor-plane that can fly at mu=1, i.e trailing blade is stationary. The Carter-Copter (www.cartercopters.com) can take off vertically and land near vertically but fly at 450kts, so they claim. I want one NOW!

Hell, I want one. I want it NOW! Oh, must get rich first.

Nice video. Cranked up the music and made whirly-bird noises.

I'm sorry, I don't care how good the X2 is, it's just not as goddamn cool as the Osprey.

I want my AnimeCopter NOW!

@Sam: "Wasn't there a design where two lots of rotors intermeshed?" - What, you mean for this specific project? Intermeshing rotor configurations have been round for a while.

http://en.wikipedia.org/wiki/Kamov_Ka-50

still waiting for the model with turbo boost .

What pissed me off a big about the Comanche vs Hokum was the specs they used. Despite having a bigger engine and contra-rotating blades, the game had all the advantages on the Comanche: accelleration, top speed, maximum lift. And where they had the Hokum better off (carry weight) was nerfed by having only the smaller weapons available, so you couldn't hook on HARMs or similarly useful (and heavy) arms and so even up the balance.

"Wasn't there a design where two lots of rotors intermeshed?"

Do you mean tandem rotors, one on each end and a body slung between? These are more common than you realise. They have feature in designs dating from the late 40s.

They're used in heavy lifting helos like the CH-47 Chinook (aka the Prince Willy taxi).

Jobs cos that's not a halo, they're supersonic rotor tips!

Is that a quarter of the noise? Or a quartered decibel count?

Four of them would produce the same amount of noise?

Can you even say "times quieter"? It doesn't scan right.

The thing looks like a blender anyway.

I meant from way back.

Well, at least for me, a pretty good explanation of the engineering problems. Useful reading.

Two contrarotating props.

Wouldn't the down draft from the prop on top play havoc with the prop below making things a little unstable?

For those who commented about the 'coolness' of jets, be they turbojets or turbofans compared with a turboprop, two main factors.

1. The pusher prop is driven off the main engine, i.e. it doesn't require an additional powerplant for the forward propulsion. This saves weight and hence fuel while allowing greating lift capacity and greater range.

2. Turboprops are more fuel efficient at these sort of speeds than either turbojets or turbofans. Fuel savings again giving rise to increased range and lift capacity.

As for comparisons with the V-22, hmm. It's taken over two decades effort by Boeing and the aircraft still isn't performing correctly. The V-22 is big, horrendously complicated and uses all manner of technology to perform certain tasks, e.g. auto-rotation, that have been solved perfectly well in the previous fifty years. The X-2, on the other hand, uses some very clever engineering *where it is needed* and in all other respects it is as simple as can be.

Now that's good engineering in my book.

An FYI for everyone.

Most helicopters, probably including this one, DO use jet engines. Go look up "turboshaft". It's a kind of jet engine optimized for producing shaft power rather than jet thrust, common on helicopters and even the M-1 tank.

Using jet engines to drive bigger fans actually works out rather well for efficiency and power. See: turbofan

This is better than using the turbojets for raw thrust, and is why a helicopter with relatively puny jet engines can lift itself off the ground while the Harrier and F-35 need monster engines.

If you'd rather have a cool looking vehicle than a working one, by all means use bog standard turbojets.

I'm told the Ka-50 is a beast. My friend in the USAF was in training to be a gunner on the Blackhawk. They were told by an instructor that if they see a Ka-50 coming at them, they'll be better off just jumping out, even without a parachute.

Obviously not since it flies quit happily.

Don't let 'em get you down MrPage, even if you did report on Sikorsky having developed a hyperdrive, I'm sure somebody would still be whinging about it one way or another.

Just wanted to add that I enjoyed reading this article, it was interesting, ta.

You may be thinking of the Kaman Husky which had two side by side rotors that overlapped by about a rotor span. Despite looking like the worst idea ever I think it had 0 fatal accidents in service, it may not have had any accidents.

As to the downdraft from above affecting the bottom rotor, it would alter the relative airflow, but this is rectified by having the lower blades at a different angle of attack to generate the same amount of lift.

"Just out of interest, what would be news".

Well I supose fast trains and econmical cars would be news in the US.

Nice article however, so never mind funny comments.

can a coaxial rotorcraft autorotate? My CX2 can't autorotate, but it's admittedly a toy.

The control linkages for a real aircraft, with variable speed rotors, means each rotor needs separate collective and cyclic control linkages or acutators..is this all driven by electronic actuators? because mechanical linkages on two spinning shafts would be a nightmare. Toy coaxials only do the cyclic on the lower rotor and I haven't seen one that does collective on any rotor.

As far as transmission difficulties, this has a slightly less difficult design (tho the Osprey's power sharing transmission is unique not in implementation but dealing with the horsepower and being lightweight) but it's control implementation may provide some serious challenges. If it's all electronic it's easier but then you have absolutely no control if your electrical power is lost. Six of one, half-dozen of the other.

War is dangerous, and high performance aircraft for war use are even more so. Been that way forever, and isn;t going to change no matter what contractor is supplying hardware.

BTW, excellent article, LP!

Yes, you are thinking of the Kaman Huskie from the 50's-60's

http://www.h43-huskie.info/

(Mod., we need a propeller beanie or some other icon to denote mastery of trivial BS like antique aircraft/cars, etc)

@Joe Cooper (why turbojets)

Read (or rather sing) Ash's comment whilst you look up and wave at Msrs. Santini and Hawke, Ms. O'Shannessy (and the joke) as they fly over your head.

And obviously only the TOP of the helicopter is black - the bottom must be as white as Archangel's suit.

Mine's the "Santini Air" jacket.

Couldn't they make do with one set of rotors and a clever tail design?

After all, a bog standard Lynx with speed blades (now standard fitting), will do 249knts; when they said much faster I was expecting 300-400knts.

No icon cos I'm tired and cant think of a way to involve Paris

Lewis, haven't you realised yet that The Reg comments sections are only EVER used by the glass-half-empty brigade?

Paris: I bet she's emptied enough glasses in her time.

In 1939 Flettner designed the first helicopters with counterrotating intermeshing rotors (the FL265 prototype). This was later developed into the FL282 Kolibri. See

http://www.fiddlersgreen.net/AC/aircraft/Flettner-282/flettner.php

for details

The Sikorsky is very interesting but... Take a look at the Fairey Rotodyne.

There was another design where there were two main rotor disks that intersected each other at a 90 degree angle. Each rotor hub was angled outboard, away from the fuselage, at a 45 degree angle.

It's name escapes me.

Mine's the one with the pilot wings drawn in with Crayola because it makes my passengers make funny faces.

Looks like a maintenance nightmare with all those enclosed and open shafts and numerous other vibration hazard points , all in all probably more trouble then it is really worth ! Might be a goer if the main blades are redesigned to take into account a concept that was solved by nature aeons ago though and only just rediscovered by man recently !

One should also not forget the current bulk of RAF aircraft are down and out due to either overtime on the frames , lack of decent spare parts or being flown by many pilots who can't even hit the broadside of a barn at even 100 paces , all thanks to Tony B Liar and his assorted boot licking take a bribe friends being too cheap to fund the real cost of his "Follow the DC Chimp's in your posterior adventures"

because she contra-rotates all the time..........

Ditto on what Rob wrote.

I look forward to Lewis Page's articles.

Journalism strikes again. Unless this is a direct quote. How can anything be four times less? Four times more, yes. A quarter, yes. But the illogical Americanism where more is less. Ouch!

Mine is the one with the lexicon in the pocket.

Grumpy Old Git

The Husky, that's the one!

Thanks people!

I thought the main reason heli's are not in common use in urban environments is more to do with the cost of running and maintaining them. That and the rotors tend to be a safety concern (something the X2 doesn't really address) needing quite a large safety exclusion zone for takeoff and landing. I would think the noise levels would be only a minor issue by comparison.